Product Description –
The FSM-50S Fusion Splicer sets the standard for core alignment fusion splicers. The FSM-50S is the fastest field splicer available, and can complete a splice and tube heat in a total of 44 seconds. Important features include the smallest size and weight in the industry and the legendary ruggedness Fujikura provides. The FSM-50S also includes user-friendly features such as calibration-free arc adjustments (with AUTO splice mode), automatic fiber type identification and reduced operational steps. The FSM-50S also offers increased flexibility for various splicing tasks with user-selectable front and back monitor positioning. Automatic core to core, low-loss splicing regardless of fiber quality or age. Multiple pre-programmed modes for specialized splicing.
|Model||FSM-50S Fusion Splicer|
|Applicable Fibers||SM (ITU-T G.652), MM (ITU-T G.651), DS (ITU -T G.653), NZDS (ITU-T G.655)|
|Cladding Diameter||80µm -150µm|
|Coating Diameter||100µm to 1000µm|
|Fiber Cleave Length||8 to 16mm with 250µm coating diameter.
16mm with 900µmcoating diameter.
|Typical Average Splice Loss||0.02dB with SM, 0.01dB with MM, 0.04dB with DS, 0.04dB with NZDS.
Measured by cut-back method relevant to ITU-T and IEC standards.
|Splicing Time||Typical 9 seconds with standard SM fiber|
|Arc Calibration Method||Automatic, using results of previous splice when in AUTO mode. Manual arc calibration function available.|
|Splicing Modes||40 user programmable modes and up to 60 modes for reference (factory predetermined setting).|
|Splice Loss Estimate||Based upon dual camera core alignment data.|
|Storage of Splice Result||The last 2000 results to be stored in the internal memory|
|Fiber Display||X / Y, or both X and Y simultaneously. Front or rear monitor display options|
|Magnification||295x for single X or Y view, or 147x for X and Y view|
|Viewing Method||Dual cameras with 5.6 inch color LCD monitor.|
|Operating Condition||0 to 5,000m above sea level, 0 to 95%RH and -10 to 50°C respectively|
|Mechanical Proof Test||2N|
|Tube Heater||Built-in tube heater with 30 heating modes|
|Tube Heating Time||Typical 35 seconds with FP-03 protection sleeve|
|Applicable Protection Sleeve Length||60mm, 40mm, micro|
|No. of Splice/heat With Battery||Typical 80 cycles with BTR-06(S) / Typical 160 cycles with BTR-06(L)|
|Power Supply||Auto voltage selection from 100 to 240V AC or 10 to 15V DC with ADC-11. 13.2V DC with BTR-06(S)/(L)|
|Terminals||USB 1.1 (USB-B type) for PC communication. Video terminal RCA video jack / NTSC.|
|Wind Protection||Max. wind velocity of 15m/s. (34 mph)|
|Dimensions||150W x 150D x 150H (mm) / 5.9W x 5.9D x 5.9H (inches)|
|Weight||2.8 kg (6.4 lbs.) including AC adapter ADC-11|
- Automatic core to core, low-loss splicing regardless of fiber quality or age
- 9-second splicing time
- 35-second heat time (60mm sleeve)
- Dual, user selectable monitor position
- Excellent visibility in bright sunlight with 5.6” TFT Color LCD display
- Automatic arc calibration
- Long life battery (up to 160 splice/shrink cycles per charge)
- The Fujikura 50S is applicable for optical fibers